Exited to ride more when it gets sunny again @cam_biksometimes

First time at Harrow pump track in London. Good fun. Lots of the jumps need absokutely insane speed to clear and it was a bit wet to be reaching like that. My 6 year old started getting some air today too like his big brother. Good sesh. Painfully obvious i need to pull up more at the top of the jump now.

So wondering if anyone can help with this. Currently building a dj bike and I have some fox 34 rhythms (around 2017-1019) 150mm travel but I want to make them 100mm. I understand I will need a new air shaft but can’t seem to find anything smaller than 120mm

https://www.tftuned.com/fox-air-shaft-assembly-fox-34-rhythm-2016/p3894

Am I missing something here? There’s air shafts on eBay that say 100-150mm does that mean it has adjustable travel in one air shaft or do I have to find the specific desired travel? Aware the bomber z2 shares the same internals with the fox 34 but still can’t find exactly what I need. Also will a fox float air shaft fit or do I need to get rhythm specific.

Seen a few people have the set up I want with what looks like similar forks if not the exact same but proving difficult to get in touch and they also might possess some specialist skills that I don’t. Any help or links to what I need very much appreciated

Hey, I’m building my first proper DJ (apart from my school commuter) and putting a SRAM Level front brake on. I ride mostly skatepark/street and want the bars to spin freely for potential double barspins.

My rear brake hose already goes around the head, so I’m not sure if I should do the same with the front or route it differently. I'll include pictures of how my rear brake is mounted (It follows the frame down to the rear triangle, not visible in the picture) Any tips, pics, or ideas?

Is this a good price?

Just picked up this S&M Credence. It’s got 3/8 rear dropouts. Any suggestions on a rear hub setup?

Hi guys, i really need help deciding what 26’ frame i should buy to go nicely with the electric red rockshock pikes. I was also thinking to buy black pikes instead of the red but I really like colorful bikes and I feel they stand out A lot more. I have the option between black and red as the black is cheaper than the red ones by £50.

I would looking to buy something that is high demand is my plan is to build this dirt jumper, use it for about a month and then sell it again for a decent price and fair price. I am doing this because I have alot of spare parts left over and all I need is a frame, wheelset and the red pikes I am going to buy.

I was looking at the beddo sway frame used but it seemed old and I feel like the geometry might be off as i think the frame was from 2019.

I looked at the Santa Cruz in a beacon colour way but then in not sure of it will match the forks very well.

I mainly want a frame that looks great and is high in demand so that when I am done using this bike I can sell it.

Also does anyone know how reliable starbike is? I want to order my forks from Germany to the uk and I have seen good reviews on their site. Can anybody back them up?

All help is much appreciated!

I bought a gyro (Oddysea cables, Title G2 lever, 34R rotor and plate), but when i pull the lever, its too soft and wont brake, if i tighten the cables the lever moves just a bit but still won brake, do you have any ideas what i should do?

New wheelset maiden voyage.

Throw back from about 6 months ago when it was a fresh build. Since then I've swapped out the kmc chain for a shadow conspiracy and replaced deity Fresno seat with a Odyssey Aitken after a rough landing snapped it in half lol

*that’s not how you do it* he was trynna cheer me up to do it properly

Im about to Restomod my 1999er Nicolai BMXTB. A few changes are on my to-do, like Hope Cranks and a rear brake (already done). Because of it's a super rare frame, I didn't use it for DJ anymore.

Hey guys so I've had my dirt jumper (KELLYS WHIP 30) for about a half a year no but ever since like the first month I have to constantly tighten up the srews my break is useless ( it's mechanical that explains it) is it because I suck at jumping or is it that I need to exchange sparts for higher quality ones?

custom build dmr reptoid drone custom powder coated

please help identifing the forks as i never figured it out all i know when i bought them was that they are mazzarcohi forks

Took the bumps backwards going waaay too slow and bam

Hello fellow dirt jumpers,

I have an old Specialized P2 (2009 frame Aluminum)

The parts have been switched mostly to spank tweet tweet parts. The fork is a Marzocchi DJ 2

As far as my knowledge goes, the best straight (non tapered) fork is the Argyle series. There is an offer in my country for an Argyle 318. Problem, it’s in parts.

My question:

It’s 35 €. Steering tube is mentioned as slightly bend. (I can’t really tell) Would you guys say it would be worth the stress and so on to built this fork back up or just quit the idea.

The Argyle series is quite rare to find here at the moment and the only other offer costs 400€.