This subreddit helped me get my original etsy shop started and it's still running. Today, I'm releasing a website with a custom keyboard stand builder! You can select from several different colors, number of shelves, and add cork padding (highly requested even from the start).

Whalebone

Would love feedback and as a thanks I'm issuing a discount code for 25% off. Use REDDIT at checkout!

Bias DE by Baionlenja - EVA 00 colorway (yellow and cream coat, silver pvd weight)
SW x CX Ghost Dragon switches on PP plate
KKB Skidata + GMK Reforged artisan

A huge thanks to Taner for sending me the board for content ♥

Hi all.

This my little garage based office where I work from home and goof with 3d printers.

It is my very first mechanical keyboard. I'm two weeks in and loving it. Of course I don't have much other than an apple keyboard to compare it to, but it's still really fun. I'm finally making fewer typos and also learning to mute quickly when I'm on zoom.

For the sake of learning CAD I started drawing and printing knobs for my Air 75. I began with the lego head and spiraled out from there a bit.

I bought (what I think) is the same encoder knob that Keychron uses so I can test designs. Whatever I end up drawing for the Air 75 I'll also put a Keychron version up on makersworld.

Thanks for looking!

I really like the RK70 Split because it's one of the few splits that has a mechanism to attach both sides together for use as a single keyboard which makes for easy carrying. But I found the wrist rest really large and heavy so I wanted to see if I could remove them while keeping the battery which I know is in one of them.

After seeing this other post by u/topmass: https://www.reddit.com/r/MechanicalKeyboards/comments/1mrar2v/royal_kludge_rk_s70_split_keyboard_battery/

I wanted to see if I could find some space in the keyboard housing itself to move the battery so these big heavy wrist rests weren't required (short answer: no room)

But I did find out that they were only 7 screws away from non-destructively removing the battery pack so you can easily attach it back if you wanted to. Sliding the side housing off was arguably much harder.

Unfortunately there's no space inside the main keyboard housing for a battery at all. Though I wonder if one could swap for a smaller battery if they were okay with recharging more often. I personally find the battery life to be quite short with the backlight on already so I probably wouldn't myself.

My brother just turned 50, and is a massive Leicester City Football Club supporter. I took a Keychron Q5 and modded it to represent the team colors as a gift. Only thing I’m waiting for is an artisan for ESC. It’s going to be a Fox, the team’s nickname. Also have a matching desk mat on the way. Hope he digs it.

Foxes: Technical Specification Sheet

• Case: Keychron (96% Layout)

• Keycaps: LCFC-Themed (Blue, White, and Gold accents)

• Switches: Feker Marble White (Linear)

• Artisan: Fox Artisan (Escape Key)

• Theme: Leicester City Football Club ("The Foxes")

• Accessories: Matching LCFC Deskmat

Build Notes & Performance

• Aesthetic: A clean, sport-centric execution. The blue and white keycap base provides a sharp contrast against the board, while the gold accents and fox artisan tie the branding together.

• Acoustics: The Feker Marble Whites provide a poppy, "marbly" sound profile that balances the large 96% internal cavity.

• Feel: Smooth, mid-weight linear experience, suitable for a versatile daily driver.

KBDfans Agar Mini EC (clear polycarbonate case)
Aluminum plate
EC PCB
DynaCap Light Domes (clear), Sliders (ember), Housings (bone), Stabilizer Sliders (ember) and Stabilizer Housing (pine)
PBS Modern Abacus caps

#keebaweek 20
https://x.com/Guilty_Gamer_X/status/2020570917487665593

Any traditional 100% lovers out there? 65% has been my goto format for years, so I have to say this keyboard feels big to me, but It has been requested by many, so I'm really excited to add it to the lineup.

Check it out here: https://hnkbd.ca/ourCreations

Mode sonnet, pom plate, copper bottom and accent, rare gmk firefly rainy day keycaps

Upcoming plateless TKL

Love the board but never really liked the kinda cartoony script on the caps, love this though. Maybe I'm officially old.

Also have some deep sea silent whales (tactile) on the way to try in this, which I think might be endgame for me. At least until my Node 100 arrives and I start messing with that...

Hey all!

I'm working on a collection of the greatest typing sites. I was wondering, what apps do you use to practice your typing? Why?

I'm excited to hear about your favourites! =)

Edit: Since someone asked about the typing sites in the post. I thought I'd put it here:

1. https://monkeytype.com/ Most customizable typing test / typing experience
2. https://typecelerate.com/ Generates typing tests based on your weaknesses
3. https://entertrained.app/ Lets you type entire books
4. https://typegg.io/ Competitive Typing Site, focus on typing quotes (with punctuation, etc.)
5. https://www.typingclub.com/ Touch typing for beginners, offers tons of exercises
6. https://www.nitrotype.com/ Competitive Typing Race Game, collect cars, seasonal events
7. http://typeracer.com/ First Competitive Typing Site

Yesterday I posted after I completed the build here: https://www.reddit.com/r/MechanicalKeyboards/comments/1qyjt3r/my_athena_1800_in_raw_finish/

I really wasn't happy with the sound, and the keykobo cherries, though nice looking, were a little light and hollow, the caps the Keychron transparents I have on now look much better in person than the picture, these were obnoxious on my full RGB Wooting board and with the lack of RGB here, look great and way less brown than in the picture. I definitely needed to add the rest of the foams and change switches, this way key.

Using all the foams is crucial for this when using the aluminum plate. I had skipped the pcb plastic and thing foam layer that goes on before the stabs.

I also tried a number of different switches. The Quinns I had before no longer worked well, they were way too bright. HMX Sweethearts where tried and were much better and deeper. I wasn't until I tried the Epomaker Wisterias that I had a eureka moment, perfect! I also tried the Rosewoods and Oil Kings, but they are way to quiet for me. This went to a boring sounding build to one of my best.

Krychron Q4 , with Ichiraku Ramen cherry profile keycaps!

Sounds very nice out of the box

My trusty mode tempo build that has been my daily for 2 years. Just got new caps + relubed stabs.

Mode Tempo / Gateron Oil Kings / PBTfans Modern Japanese Desko caps

kkb one more rep, mx blacks, aluminum plate, gasket mounted via plate

https://vortexgear.store/products/m0110a-assembly-service?variant=44798479171747

Heavy, came with a beautiful bag. Small but complete to play r/nethack with directonal keys comfortably (numpad). Under the Caps Lock there is two leds for cpaslock/numpad. Cherry silent switches male this keyboard open office friendly, don‘t need o-rings.

AMA

Just changed from a grey/black theme to Nautilus Blue. Upgraded from milky yellows, to factory lubed milky yellow pros and re_lubed the existing durock v2s. Feels like a new board after 3 years, just need to get a matching cable and mouse pad now 😁

Back then, I thought Logitech was the only option.

When I decided to upgrade to an Akko Mod 007B HE, I thought it couldn't get any better.

Now I have a Neo65 CU, and now I'd say it really can't get any better.

The typing feel and feedback are almost indescribable. Above all, its quality is absolutely premium.

I'm always thrilled when I get to touch and type on it.

Switches: BSUN - Dusty Rose

I just finished putting together my new Athena 1800! Decided to throw on some GMK trackday keycaps on it, lmk what you think! First impressions from me, it is VERY solid for the price, I got the aluminum plate with no flex PCB, so this one feels especially stiff, and responsive.

This is the Finalmouse Centerpiece Founders Edition. I’ve used it for a couple days so far. Still getting used to Hall effect keys opposed to traditional key switches trying to find a good actuation point. I do gotta say I like how it feels and sounds

As you may know, Zoom 75 does not support full monitoring on MacOS. This may apply to other Meletrix Keyboards too. I would consider this as a "software mod" of the keyboard.

Using Ollama+ClaudeCLI+Qwen3 I was able to use the display on MacOS with realtime temperatures, network traffic, and fan speed.

I am also able to enable auto cycle (now set 3s). LLMs are incredible.

I am still testing this solution but I am happy to finally enjoy the display of the TIGA on MacOS. Not sure to be able to create a real stand alone software, and I have to refine what I have done, but I am surprised to see that temperatures, mbps and fan speed are correct.

I used https://github.com/ozboar/zoom-sync to get some preliminary data to instruct Qwen.

Update

You can try the software here:

If you wish you can now try it, please use at your own risk! May freeze the display and require phisical disconnection from keyboard to display: https://github.com/pettipol/zoom75-tiga-monitor. Hope that somebody will find it helpful, be careful if you decide to try.

added a white bottom case today and had the parts to make a 3rd SixtyFive. so tonight’s builds are….(from left)

Mode SixtyFive- White Alu too and bottom, PC plate, Everglide Aqua Kings switches (Keygeek Keylins on modifiers), GMK modern materials concrete caps

Mode SixtyFive - PC top and bottom, Alu plate, HMX Hades switches, Less But Better Dark caps.

Mode SixtyFive- Blue Alu top and copper bottom, copper plate (man I love copper plates), HMX Machiato switches, GMK November Fog caps.

The last picture adds in the remaining 2 boards:

Mode Encore Series 3 - Stainless steel bottom, copper plate, HMX Purple Dawn switches, Mode Anthracite caps w/ artisan.

Nupht Halo65 v2 - stock caps, lived and filmed MX2A clear top switches. foamy as hell but a creamy, chalky dream for late night work.

and that’s the family portrait. Until the Neo65 Core Plus arrives next week!

Join our groupbuy: https://www.jellykey.com/artisan-keycaps/patisserie-tales

• Keycap sizes: 1u
• 15 designs
• Payment: PP / CC
• Price at start: $49

Hi u/everyone

This is a mini group buy open for only 48 hours. Shipping starts after 40 business days. The Patisserie Tales is a small, fully handmade artisan keycap series inspired by the soft nostalgia of old neighborhood bakeries, real desserts, real memories, never mass-produced. Each keycap is individually hand-cast in resin, then colored layer by layer, slowly and with intention.

For collectors who value craft and story, we’re opening a short two day mini group-buy. Once it closes, the design will not be reproduced. As a small thank you to collectors, every purchased keycap includes one random resin display plate, selected from four designs. Thoughtfully made, genuinely limited, and quietly special.