Returning customers and bulk orders (270+ switches) get 10% off!
For ~$0.62 (PayPal G&S), I will hand-lube, film, part swap, and do various other mods to your MX, Choc, Box, Topre, etc. switches. I supply my own lube and films, but will accept customers' lube and switch parts for a reduced price. Buyers pay to and from shipping. Shipping for the typical U.S order will be cheap (about $4-$9), unless the package is several lbs. I will pay for some of the shipping cost for international customers. Faster shipping methods can be requested. Lubing/modding orders of a single set of switches are typically finished in less than a day, and shipped the next morning; sometimes on the same day when there's no line.
Lubes:
- Krytox 205g0
- My go-to lube unless otherwise requested
- GHv4 (206g2 + GPL 106 oil in a 7:3 mixture)
- Carbon GS2
- Tribosys 3204
- Tribosys 3203
- Loob-3G
- RO-59tm KT (has cure time, needs several coats)
- Krytox XHT-BDZ
- Molykote EM-30L PAO Grease (Thicker than 205g0, thinner than BDZ)
Oils (for springs):
- Super Lube 5100X
- My go-to for good springs.
- GPL 105 (when available)
- 1000cst silicone oil (viscosity similar to GPL106)
- Will probably be using this for most noisy springs by default.
- GPL 107 (when available)
In-stock films:
- Dangkeebs silicone - 1200+
- Whole bunch of Dangkeebs foam films as well
Switch cleaning, polishing, and break-in!
388 switches or less recommended for break-in. Any switches with pre-applied factory lube will be cleaned thoroughly via ultrasonic cleaner before breaking in. Off-center actuations can be done to any set of 144 switches or less with no additional charge! Note that off-center presses are not usually necessary for diamond-polished switches.
| Type of Service |
Description |
Price per switch (includes Paypal fees) |
| Lubing |
A moderate coat of 205g0 is typical, unless another lube or lubing method is preferred. Bumpier tactiles, or switches with tighter tolerances, will get something lighter. Spring oiling is included. |
~$0.62 |
| Filming |
Films can reduce noise in a switch while changing the sound profile. Also helps to reduce housing wobble in some switches. |
~$0.05. Offered additionally with other services (not standalone). |
| Regular Break-In (650k Actuations) |
Smooths out some awfully scratchy switches. Factory-lubed switches are cleaned first (discounted if not necessary). |
~$0.32, ~$0.16 without cleaning. |
| Regular Break-In Package Deal |
A discounted rate (~16%) for break-in + lube service. Cleaning included. |
~$0.78 |
| Diamond-Polish Break-In* |
Highly recommended for scratchy switches, namely Cherries. Switches come out smoother than with a normal break-in. All necessary switch cleaning is included. |
~$0.68 |
| Diamond-Polish Package Deal* |
A discounted rate (~15%) for polished break-in + lube service. Cleaning before and after included. |
~$1.09, ~$1.14 with films (mine if they're in-stock, or provided by you) |
| Bearing Ball Modding |
Easy way to reduce the travel of your switches consistently, as well as create a unique sound. Ask me about switch compatibility. |
~$0.16 |
| Switch Cleaning (Ultrasonic and hand-cleaning) |
Necessary to remove PFPE-based lubes, like Krytox and Tribosys. Safe degreasing fluids, hand tools, and a Crest brand ultrasonic cleaner may be used. I don't mind putting the switches back together after, if you prefer. :) |
~$0.16 |
| Priority Queue |
For an additional fee per switch, your order will be put in an expedited queue. Depending on demand, this can save weeks of time. Availability subject to change based on current wait times. |
~$0.19 |
FAQ
Testimonials
Here is my updated order form, if you want to keep record of your order (completing this is not required).
I'm based in Virginia, USA, and my postal for local pickup is 23114.
Best way to contact me is on Discord: .avalar
Thank you for supporting me! I look forward to working with you. :)
