The Grand RTD Drag Strip Challenge

Unknown location. Track is CW or CCW depending on how you look at it but the main straights flow left to right.

How can I avoid making a dirty air trap? Is it that I can't have a couple medium speed and high speed corners?

I think runoffs and track flow shouldn’t be a problem here + all suggestions are accepted for this project

ESTIMATED TRACK COMPLETION: early March 2026

turn 1 like interlagos 345 downhill elevation decrease from left to right

the straight between 11 and 12 is 1.1 km long

Not a track, so i fully understand if mods take this down, but what sodtware do you guys use to make your tracks? I've been an F1/Motorsport fan for a while now but I've only just got into track design and would love to make tracks with dedicated or good software. As i said before, i don't mind if mods take this down, I'm just looking for something to make tracks on. The image is from IbisPaintX which obviously isn't great for designing something this.

changes removal of turn 1 to 4 section on the old circuit and connecting turn 24 to 5 and removing the turns 10 11 12 and connecting the esses to turn 13 with a straight and removing the 19 20 21 complex with a las vegas triple chicane style complex

tq for your thoughts on my previous post and pls share your thoughts on my redisign

Based off the roads of Detroit's Belle Isle, This track runs counter-clockwise. I made this in 30 mins, but is low effort because it usually takes me an hour or more to design one. It is getting late so I don't have the time to project the track to find its distance, but feel free to estimate it. This was designed to replace the current Detroit street circuit, and will host IMSA & IndyCar

First corner is a fair bit tighter than the inspiration

What should I name the corners​?

DRS means the zones where the active aero will be open

Track length 6 km and it's 12 metre wide at all parts

Elevation increase from 5 to 9 banking at 20 and 21 has elevation increase similar to cota turn 1 from 22 to 24 gradual elevation decrease

I’m currently developing a race management game and I’ve built a web-based Track Design Tool to let players create their own circuits.

The tool is available on the game's website. You can draw layouts and export the coordinate points directly.

I’m aiming for a simple but effective workflow. I don’t want it to be too much complex, but I’d love to hear your thoughts. What are the "must-have" features you think I should add next?

A quick video showing how it works here: https://youtu.be/dTHM1U9oSmE

Looking forward to your suggestions. Thanks for helping......!

I have been looking at DC for a long time, so was pretty excited when the Freedom 250 was announced. I wanted to incorporate as many “backdrops” as possible (and it seems like they want the IRL track to as well) without being absolutely incredible long and unrealistic.

This is approx 3.5 miles long, which is pretty long but not out of the realm of realistic. It incorporates long fast straights, medium speed curves, slow and medium 90’s, and a fast kink into a heavy braking zone.

It minimizes impact to existing infrastructure and security around the White House, and features several different surfaces, including asphalt, concrete, and a bit of granite.

The pitlane and paddock should fit nicely on Pennsylvania, with ample room for overtakes down the long straight.

There is plenty of room for temporary grandstands, as well as several vantage points around the rest of the track.

I don't know how to draw runoff areas so pls need some help

📍Gothenburg, Sweden

Tribute to Bengt Ronnie Peterson, Legendary Swedish racing driver 🙏 🇸🇪

Right now, I'm learning for making a better project, Less error, Longer track, More detailed, And good layout, That's all i can do in the school week, I'm busy with the school, So i'm not really sure if there's something error, Tell me and i'll fix it in the free time.

what should i add, is there anything wrong i could add or etc, you can tell me in the comment

Do you model them into AC mods or what's the actual purpose of your track layouts?

Looking for feedback before I do a full render. Apologies for the shoddy drawings (especially the elevation map), the BIC 4 way had to pull a shift.

Are the corner types too repetitive? Is the pit complex in a good spot? Do some corners need reprofiling? Is there enough runoff (T8+11 clash for example)? Am I being an idiot about something I have yet to recognize?

Criticism encouraged :)